Product Description

AC-30tons three-phase EAF
1.late-model short-net technology to reduce the degree of unbalance for three-phase impedance;
2.copper-steel conductive cross arm technology
3.tubular water-cooled wall and tubular water-cooled furnace roof technology to extense the service life for the furnace wall
4.eccentric bottom tapping to achieve tapping without slag
5.equipped with furnace door non-consumable carbon-oxygen gun 
6.the hydraulic system adopts constant pressure variable pump,the system pressure is 14MPa
7.furnace tilting ,furnace cover open and electrode lift-down all use rated valve control
8.controlled by computer and PLC
The nain raw material requirements:
1.scrap:in accordance with the revelant standard of GB/T4233-1996
2.All the refractory material include alumina brick,magnesia carbon brick,light-weight insulating brick and etc.All the physicochemical quality must confirm to governent standard.

main equipment:
1.furnace cover and lifting rotating device
2.electrode and electrode lifting device
3.special transformer for electric furnace 
4.short net
5.water-cooled system
6.hydraulic system
7.air-compressed system
8.billet pull-out car
9.charging pocket
10.water-cooled carbon-oxygen gun
11.high-low voltage power supply system

the notes to the machinery parts:
1.furnace assembling :the whole furnace body can leave the furnace tilting platform alone to achieve quick exchange for the furnace body.
2.EBT tapping:
the tapping duration is 90seconds which is 75% less than spout tapping.The tapping temp. is reduced by 30℃.And the power consumption has reduced by 6-8%.Meanwhile,the molten steel has less intaken the gas.